Lucyravenscar Crochet Creatures

Previous Entry Share
Pattern for a slightly fierce but friendly really Dragon.
*I've now written this pattern out in a more standard way, and changed a few minor things. In particular I've made the wings stronger so they will stick out better. The new version is too long to post here, but you can download the pattern from Ravelry:

You can also see photos of the new Fierce Little Dragon at my Flickr:

Of course, you can still follow the pattern below if you find that easier, but do check out the new wings, you may prefer them.

Edited May 2011*

I'm going to assume that anyone who tries to make this has a reasonable knowledge of crochet & making amigurumi, and that you know how to increase and decrease. So I am just going to write the number of stitches in each round and then explain any fiddly bits in more detail. Semi-colons (;) separate the rounds, assume you start with chain 2 & crochet into the first stitch, or with a magic ring.

Use a 3.5mm (E) hook.
Use any yarn you like, you may need to increase the hook size if you use a very chunky yarn. Crochet tightly so that the stuffing won’t show.
Mark the start of each row.
Stuff the body as you go along, not too tightly so that the dragon can bend its neck and tail.

inc 2 = do 2 sc in one stitch.
dec 2 = reduce 2 stitches down to one sc.
sc = single crochet (US), double crochet (UK)
FO = finish off
st = stitch(es)
ch = chain
yoh = yarn over hook
ss = slip stitch (US), single crochet (UK)
hdc = half double crochet (US), half treble crochet (UK)
dc = double crochet (US), treble crochet (UK)

Start at the dragon’s nose:

8 sc in ring, FO leaving a bit of a tail.
8 sc in ring, then sc into any stitch on the first ring and go all the way around both of them, ending up with 16 st. Use the tail to sew up any gap between the 2 parts.

16; (do the following reductions at the middle top and middle bottom of the nose) 14; 14; 12; 10; (do the next 4 increases at the top to create the head) 14; 14; 14; (do the following decreases at the top) 12; 10; 8; 8; 8; (increase by one stitch anywhere) 9; 10; 10; 10; 11; 12; (do the next increase at the bottom to create the body) 18; 18; (increase every 3rd stitch) 24; 24; 24; (do the following increases at sides) 26; 26; 26; 28; 28; (do the following reductions at the sides, but a bit randomly, or there will be a distinct line) 26; 24; 22; 20; 18; 16; 14; 14; 12 x 11 rounds; 11; 11; 11; 10; 10; 10; 9; 9; 9; 8; 8; 8; 8; 7 x 10 rounds; 6; [If the tail doesn’t look pointy enough, continue for 3 more rounds at 6 st, then 3 rounds at 5st] dec 2 x 2; FO and sew up when completely stuffed.

Back legs (make 2):
6 sc in ring; 12; 12; 12; 12; (6 sc, dec 2, dec 2, dec 2) 9; 9; 9; (6 sc, inc 2, inc 2, inc 2) 12; (inc 2 every 2nd st) 18; 18; 18; (3 sc, dec 2, dec 2, 4 sc, dec 2, dec 2, dec 2, 1 sc) 13; (2 sc, dec 2, dec 2, 2 sc, dec 2, 1 sc, dec 2) 9; (2 sc, dec 2, 2 sc, dec 2) 7 – keep reducing every 2 st until the hole is too small to do any more. Stuff, then use cream/beige yarn to sew claws. Sew up top of leg.

Front legs (make 2):
5 sc in ring; 10; 10; 10; 10; (6 sc, dec 2, dec 2) 8; 8 x 6 rounds; keep reducing every 2 st until the hole is too small to do any more. Stuff, then use cream/beige yarn to sew claws. Sew up top of leg.

Spikes on back:
Small – ch 3, sc into 2nd ch from hook, hdc into 3rd ch from hook, ch1.
Large – ch 3, sc into 2nd ch from hook, yoh, hook into next ch, yoh and pull through st, yoh, pull through 2 loops, yoh, into same st, yoh and pull through st, yoh and through all loops on hook, ch1.

You make the spikes continuously. I did 3 small, 10 large, 3 small, missing out the last ch1 and leaving a tail of yarn to sew to the body. Adjust the number of spikes you make to fit along your dragon’s back from behind the eyes to the tip of the tail.

Wings (in numbered rows):
1) ch 16.
2) Miss 1st ch. 3 ss, 5 sc, 7 hdc, ch 2, turn.
3) 7 hdc, 5 sc, 3 ss, ch1, turn.
4) 3 ss, 5 sc, 7 hdc, ch 3, turn.
5) Miss 1st ch, 2 ss (to make claws), 7 hdc, 5 sc, 3 ss, ch1, turn.
6) 3 ss, 5 sc, 7 hdc, ch 2, turn.
7) 7 hdc, 5 sc, 3 ss, ch1, turn.
8) 3 ss, 5 sc, 7 hdc, ch 3, turn.
9 – 12) Repeat rows 5 – 8.
13) Miss 1st ch, 2 ss, 15 sc.
Then sc along the base of the wing and along the other side, ch3, turn, miss 1st ch, 2 ss to make last claw. FO leaving long tail. Use this to secure the last claw to the rest of the wing, then take thread through wing to its base, ready to sew onto body.

Leave a long tail of yarn when you make your first loop.
Ch 6, turn.
Skip 1st st, sc, dc,sc,ss. Leave the last ch and ss up the other side of the ear to the tip. FO
Sew onto head, going over the last chain several times to create the brow bone shape.

Completing your dragon:
Sew the spikes along the back from just behind the ears to the tip of the tail.
Sew the legs on in the obvious positions. I sewed them by pulling the tail of yarn through and out of the side of the leg, at the top. Then sew the yarn several times into a small area on the body so that they are slightly jointed and can move about quite easily.
Sew on the wings slightly to either side of the spikes with the front edge about level with the front legs.
Embroider eyes or sew on beads for eyes. I embroidered a roughly diamond shape in a contrasting colour below the brow bone, then used black for the pupils so they looked a bit like cat’s eyes. If you want to use safety eyes, you’ll need to fix them in quite early, before you crochet the neck, or you won’t be able to fit them.

I hope that all made sense, let me know if you have any questions. I will put more pictures on my Flickr page

***This is a free pattern of my design, so please do not sell it. Otherwise, use as you like, but if you make this dragon to sell you must include a link to this pattern. Thank you!***

  • 1

requesting permission for tutorial

I am contacting you because I'm a crafty witch for The Leaky Cauldron, working in the Harry Potter Crafts section, which you can see here:

As you can see, we are posting tutorials and pictures for all sorts of Harry Potter Crafts there, and I was wondering if you would allow me to use tutorials and pictures of the George's Dragon pattern posted on your live journal ( I would identify the pictures and tutorials as having been created by you. There are also 2 long paragraphs on the front page of the crafts section explaining visitors that they should use the patterns they see on the website for their personal use and not to sell them, as the designers are the only ones who own the copyrights to those items. There is also a copyright sign right by your name on the page of a particular item. Last but not least, you will notice that the credits at the bottom of each crafts mentions a source, so in your case, it would say that your tutorial was taken with permission from "heavens_hellcat (" and we would include a link to your website there.

The Leaky Cauldron easily gets between 70,000 and 1,000,000 hits per month. I believe letting us add your patterns and pictures there would increase your visibility too. And of course, it would enable thousands of crafters all around the world to make wonderful crafts like yours!

Hoping to post your creations soon!

Edited at 2008-07-22 03:04 am (UTC)

Re: requesting permission for tutorial

Of course, dragonsinger954, I'd be delighted. I love Harry Potter, so I'd be chuffed to see my pattern on the Leaky Cauldron website.

  • 1

Log in